CIAO
Uso la GNU/Debian Lenny Testing con GNOME.
Ho notato che, se da un computer Windows, instauro una connessione SSH-VNC verso il mio Server Linux avviando, su questo, un display X remoto sul quale viene eseguito GNOME, tale ambiente viene caricato in lingua inglese anziche` in italiano come avviene se lo uso in locale. In altre parole, GNOME, in locale, e` in italiano; mentre, in remoto, e` in inglese. Come mai?
Poi, ho notato che, caricando GNOME su un display X remoto, tutti i tasti SHIFT, il tasto CapsLock ed il tasto Block Scroll non funzionano. Come mai?
Poiche` devo usare la tastiera sia con il layout americano che con quello italiano, ho configurato il server X.Org in questo modo
[code:1]
PLUTO:~# cat /etc/X11/xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,it"
# Option "XkbVariant" "intl,nodeadkeys"
Option "XkbOption" "grp:alt_shift_toggle"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Driver "ati"
BusID "PCI:1:5:0"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Monitor Generico"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Monitor "Monitor Generico"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
[/code:1]
Quando carico GNOME in locale, la configurazione della tastiera e`
![](http://img504.imageshack.us/img504/5991/impostazionetastieragnodb5.th.jpg)
Mentre, quando lo carico su un display X remoto, tale configurazione diventa
![](http://img405.imageshack.us/img405/2794/impostazioneremotatastikj6.th.jpg)
Per la cronaca, ho provato ad avviare il server x11vnc sul Server con il seguente comando /usr/bin/x11vnc -inetd -rfbport 5901 -rfbauth /home/balubeto/.vnc/passwd -create -capslock -forever o con il comando /usr/bin/x11vnc -inetd -rfbport 5901 -rfbauth /home/balubeto/.vnc/passwd -create -forever ma non cambia nulla. Invece, sulla macchina Windows XP ho il viewer TightVNC.
GRAZIE
CIAO
Uso la GNU/Debian Lenny Testing con GNOME.
Ho notato che, se da un computer Windows, instauro una connessione SSH-VNC verso il mio Server Linux avviando, su questo, un display X remoto sul quale viene eseguito GNOME, tale ambiente viene caricato in lingua inglese anziche` in italiano come avviene se lo uso in locale. In altre parole, GNOME, in locale, e` in italiano; mentre, in remoto, e` in inglese. Come mai?
Poi, ho notato che, caricando GNOME su un display X remoto, tutti i tasti SHIFT, il tasto CapsLock ed il tasto Block Scroll non funzionano. Come mai?
Poiche` devo usare la tastiera sia con il layout americano che con quello italiano, ho configurato il server X.Org in questo modo
[code:1]
PLUTO:~# cat /etc/X11/xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,it"
# Option "XkbVariant" "intl,nodeadkeys"
Option "XkbOption" "grp:alt_shift_toggle"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Driver "ati"
BusID "PCI:1:5:0"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Monitor Generico"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Monitor "Monitor Generico"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
[/code:1]
Quando carico GNOME in locale, la configurazione della tastiera e`
![](http://img504.imageshack.us/img504/5991/impostazionetastieragnodb5.th.jpg)
Mentre, quando lo carico su un display X remoto, tale configurazione diventa
![](http://img405.imageshack.us/img405/2794/impostazioneremotatastikj6.th.jpg)
Per la cronaca, ho provato ad avviare il server x11vnc sul Server con il seguente comando /usr/bin/x11vnc -inetd -rfbport 5901 -rfbauth /home/balubeto/.vnc/passwd -create -capslock -forever o con il comando /usr/bin/x11vnc -inetd -rfbport 5901 -rfbauth /home/balubeto/.vnc/passwd -create -forever ma non cambia nulla. Invece, sulla macchina Windows XP ho il viewer TightVNC.
GRAZIE
CIAO